SCMTD Bike Rack Program

The entire fleet, with the exception of a few older buses on Route 1, now are bike accessible. These buses are not able to support the racks due to turning radius issues.

This Bikes on Buses program will allow SCMTD to serve another transportation need in the community. There is no charge for your bike.

The following policies and procedures are in effect:

• 1. Usage of bicycle racks is free, one bike per person.

• 2. Bike loading is on a first come, first served basis.

• 3. No bicycles are allowed inside the bus.

• 4. Bicycles may be loaded/unloaded on front racks on all posted stops in the system, except those marked with a symbol indicating that loading and unloading is NOT permitted.

These New Front-Mounted Racks:

o Hold two bikes securely --

The bike rack design allows for two bikes to be independently loaded and unloaded

You can load or unload your bike in under 20 seconds

Most wheel sizes and frame types fit the bike racks

The bike racks are the safest racks for your bike on the market today. Neither the bus or other bikes make contact with your bike.

The following bus stops are restricted and not available for loading or unloading of bikes:

Future issues of Headways will announce any changes to these stops, as the District will continue to evaluate its bike stops to see if any of the above stops can safely be used.

LOADING YOUR BIKE

1. Tell the bus driver you're loading your bike. Load from the curbside only. Do not step beyond the driver's side of the bus into the traffic lane to load your bike.

2. Pull down to release the folded bike rack.



3. Lift your bike onto the rack, fitting wheels into the slots. Each slot is labeled for front and rear wheels. Bike must fit securely in the rack in order to be transported.



4. Raise and release the support arm over the top of the front tire. Make sure the support arm is resting on the tire and not on the fender or frame.

UNLOADING YOUR BIKE

1. Tell the driver you need to unload your bike when you approach your stop.

2. Raise the support arm off the tire. Move the support arm down, out of your way.

3. Lift your bike out of the rack.

4. Fold up the bike rack if there is no other bike in the rack.

5. Return to the curb with your bike and wait for bus to leave before entering traffic.

Disclaimer

SCMTD is not responsible for loss or damages to or by bicycles on transit system property.

Schedule Information

For detailed maps and complete schedule information, pick up a free copy of HEADWAYS. SCMTD bus route and schedule information is also available by calling 425-8600.

Return to How To Ride Page

Return to News Page

Return to METRO Home Page